Monday - September 19, 2005

ARRRRH! Grog From Cans Sucks!

What’s in Those Cans Besides Beer?
(NOTRE DAME MAGAZINE)

It can now be revealed why bottled beer and beer from a tap tastes different from beer in a can. Be forewarned: if you’re a six-pack enthusiast, you’re not going to like the explanation. When you sip a can of your favorite brew, you are savoring not only fermented grain and hops but just a hint of the same preservative that kept the frog you dissected in 10th-grade biology class lily-pad fresh: formaldehyde. What is formaldehyde doing in beer? The same thing it’s doing in pop and other food and drink packaged in steel and aluminum cans: killing bacteria. But not the bacteria in the drink, the bacteria that attacks a lubricant used in the manufacture of the can.

Notre Dame’s Steven R. Schmid, associate professor of aerospace and mechanical engineering, is an expert in tribology — the study of friction, wear and the lubrication — applied to manufacturing and machine design. The co-author of two textbooks, Fundamentals of Machine Elements and Manufacturing Engineering and Technology (considered the bible of manufacturing engineering), Schmid has conducted extensive research on the manufacturing processes used in the production of beverage and other kinds of cans.

Schmid explains that back in the 1940s, when brewers and other beverage makers began putting drinks in steel (and, later, aluminum) cans, the can makers added formaldehyde to a milk-like mixture of 95 percent water and 5 percent oil that’s employed in the can manufacturing process. The mixture, called an emulsion, bathes the can material and the can-shaping tooling, cooling and lubricating both. Additives in the oil part are certain bacteria’s favorite food. But if the bacteria eat the emulsion, it won’t work as a lubricant anymore. So can makers add a biocide to the emulsion to kill the bacteria.

Before a can is filled and the top attached, this emulsion is rinsed off, but a small residue of the oil-water mixture is inevitably left behind, including trace amounts of the biocide. The amounts remaining are not enough to be a health hazard, but they are enough to taste, and the first biocide used back in the 1940s was formaldehyde. In the decades since, can makers have devised new formulas for emulsions, always with an eye toward making them more effective, more environmentally friendly and less costly. But because formaldehyde was in the original recipe, people got used to their canned Budweiser or whatever having a hint of the famous preservative’s flavor. For this reason, Schmid says, every new emulsion formula since then has had to be made to taste like formaldehyde, “or else people aren’t going to accept it.” Extensive tests are run to make sure the lubricant and additives taste like formaldehyde.

“It’s not that it tastes okay. It’s just what people are used to tasting,” he says. (Miller Genuine Draft and similar brews, Schmid says, use biocides that have no flavor.) The formaldehyde flavor legacy is one little-known aspect of can-making. Another involves the smooth coating applied to the inside of cans. The rinse cycle that attempts to wash off the emulsion also aims to remove particulate metal debris that forms on the metal’s surface during the bending and shaping of a can. Like the emulsion, some of the microscopic debris always remains after rinsing. Unlike the emulsion, it can be dangerous to swallow.

To keep powdered metal out of a can’s contents, Schmid says, manufacturers spray-coat the inside with a polymer dissolved in a solvent. When the can is heated, the solvent boils away, leaving only the protective polymer coating. The coating not only plasters any microscopic debris to the can wall and away from the food, it keeps the food from interacting with can material, an especially important consideration with steel cans.

Posted by The Skipper     on 09/19/2005 at 11:36 AM   
Filed Under: • Science-Technology •  
• Comments (16) • Trackbacks(0)  Permalink •  

DISCLAIMER

THE SERVICES AND MATERIALS ON THIS WEBSITE ARE PROVIDED "AS IS" AND THE HOSTS OF THIS SITE EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, TO THE EXTENT PERMITTED BY LAW INCLUDING BUT NOT LIMITED TO WARRANTIES OF SATISFACTORY QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SERVICE OR ANY MATERIALS.

Not that very many people ever read this far down, but this blog was the creation of Allan Kelly and his friend Vilmar. Vilmar moved on to his own blog some time ago, and Allan ran this place alone until his sudden and unexpected death partway through 2006. We all miss him. A lot. Even though he is gone this site will always still be more than a little bit his. We who are left to carry on the BMEWS tradition owe him a great debt of gratitude, and we hope to be able to pay that back by following his last advice to us all:

1. Keep a firm grasp of Right and Wrong
2. Stay involved with government on every level and don't let those bastards get away with a thing
3. Use every legal means to defend yourself in the event of real internal trouble, and, most importantly:
4. Keep talking to each other, whether here or elsewhere

It's been a long strange trip without you Skipper, but thanks for pointing us in the right direction and giving us a swift kick in the behind to get us going. Keep lookin' down on us, will ya? Thanks.

THE INFORMATION AND OTHER CONTENTS OF THIS WEBSITE ARE DESIGNED TO COMPLY WITH THE LAWS OF THE UNITED STATES OF AMERICA. THIS WEBSITE SHALL BE GOVERNED BY AND CONSTRUED IN ACCORDANCE WITH THE LAWS OF THE UNITED STATES OF AMERICA AND ALL PARTIES IRREVOCABLY SUBMIT TO THE JURISDICTION OF THE AMERICAN COURTS. IF ANYTHING ON THIS WEBSITE IS CONSTRUED AS BEING CONTRARY TO THE LAWS APPLICABLE IN ANY OTHER COUNTRY, THEN THIS WEBSITE IS NOT INTENDED TO BE ACCESSED BY PERSONS FROM THAT COUNTRY AND ANY PERSONS WHO ARE SUBJECT TO SUCH LAWS SHALL NOT BE ENTITLED TO USE OUR SERVICES UNLESS THEY CAN SATISFY US THAT SUCH USE WOULD BE LAWFUL.

Copyright © 2004-2015 Domain Owner